Protection for Concrete & Masonry
|
|
|
|
Graffiti Barrier Coat
| Use on: |
| Concrete block |
Brick |
Stone |
Stucco |
| Cast concrete |
Metal |
Wood |
Other surfaces |
|
 |
|
 |
  |
| Performance Features |
• Single component, ready to use
• Makes graffiti easy to remove
• Protects painted & unpainted surfaces
• Use on concrete block, brick, stone, wood, metal, cast concrete, cement, stucco and other surfaces
• Paintable
• Goes on smooth, does not attract
dirt
• Can recoat in 1 -2 hours
• Stays clear, doesn't yellow
• Roll on or spray apply
|
| Environmentally Friendly |
| • Low VOC, low odor |
|
Coverage Rate
| Estimated Application Rate ( sq. ft. per gallon) |
Surfaces |
Minimum # Coats |
Sq. Ft. /Gal
per Coats |
Med/Fine Stucco, Pre-Cast Panels, Cast-in-place EFIS, Metal, Painted Surfaces |
2 |
250 - 350 |
Precision Block, Slit Face Block, Sand Blasted Block, Slump Block, Heavy Textured, Stucco, Brick, Unpainted Wood |
3 |
200-300 |
Add 20%- 30% sq. ft. surface coverage area for fluted, scored block or raked joints. The coverage rate will vary with the porosity and texture of the surface. |
Application
Can be applied by brush, roller or garden-type sprayer but is best applied using HVLP or airless spray. Apply multiple thin coats at the recommended application rate to avoid runs. When rolling use a high quality, lint-free 3/8” nap cover.
|
|
|
|
|
|
|
