Protection for Concrete & Masonry
|
|
|
|
Final Shield
Water-Base Concrete and Masonry Sealer
| Excellent for garages, driveways and basement floors. Protects stamped, stained or colored concrete. |
 |
Coverage
| Estimated Application Rate ( sq. ft. per gallon) |
Surface |
1st Coat
|
Add’l Coats\ |
Rough (broom finish) |
150 |
200 |
Smooth (float finish) |
200 |
250 |
Very-smooth (trowel finish) |
250 |
350 |
Sealed or previously painted |
250 |
350 |
| The spread-rate of FINAL SHIELD will vary with the porosity and texture of the surface. Multiple coats of FINAL SHIELD can be applied to increase the durability and the final gloss. |
Application
FINAL SHIELD is ready-to-use, no thinning is required. It appears milky-white when applied but dries clear. There may be some slight ambering when applied over very light colors. It can be applied by brush, 1/8” nap roller, pad or sprayer. Stir, do not shake, before using. Apply an even, thin, wet coat maintaining a wet-edge to avoid lap marks. Allow each coat to dry thoroughly (clear & colorless) before applying additional applications. Work from a container and do not pour product onto surface to spread. Stop application at expansion joints, walls or breaks defined with masking tape. Do not allow product to puddle.
|
 |
  |
| Performance Features |
• Protects the surface from:
- Moisture penetration
- Hot tires
- Stains
- Salt, chemicals and most
petroleum based solvents
• Provides an easy to maintain finish
for previously sealed or stained concrete
• Protects from dusting and staining
• Breathable
|
Decorative |
• Tintable – offers the beauty and
uniqueness of translucent concrete
stains
• Dries clear – lets the texture of decorative brick or concrete show through
• Stays clear, does not yellow |
Easy to Use |
• Pre-mixed, no dilution necessary |
|
|
|
|
|
|
|
