Protection for Concrete & Masonry
|
|
|
|
S-20
Deep Penetrating Silane-Siloxane Clear Water-Repellent Sealer
| Specially formulated for dense, flat and vertical concrete surfaces... Including brick and stucco. |
 |
 |
 |
 |
 |
Coverage
Estimated Application Rate ( sq. ft. per gallon) |
| Pre-cast/Tilt-up |
Smooth |
Exposed Aggregate |
80-120 |
50-100 |
Stucco, plaster |
Smooth |
Textured |
100-150 |
80-100 |
Brick, non-glazed |
Clay |
Concrete |
100-150 |
80-100 |
| The spread-rate of OKON S-20 will vary with the porosity and texture of the surface. Always apply material to test area prior to general application to establish spread rate. |
Application
OKON S-20 is best applied by low pressure airless spray, but can be applied by
garden-type sprayer. Small areas can be applied by brush or roller. Use a small to medium size airless pump (.33 - .66 gpm) set at low pressure – 500 psi, and use a large tip - . 035 - 050” tip.
|
 |
   |
| Performance Features |
• Protects from the damaging and
unsightly effects of water absorption
- Efflorescence
- Freeze-thaw damage
- Water damage
• Breathable |
| Easy to use |
| • Pre-mixed, no dilution needed |
| Environmentally Friendly |
• Water base
• Very low odor
• Low VOC - Complies with South
Coast Air Quality Management
District. Rubs (SCAQMD) |
Decorative |
• Lets the natural beauty and texture
of decorative concrete show through
• Stays clear, does not yellow
• No sheen or film build-up |
| Warranty |
| • Backed by a 5 year warranty for qualifying projects* |
|
|
|
|
|
|
|
