Protection for Concrete & Masonry
|
|
|
|
S-40
High Performance Deep Penetrating Clear Silane-Siloxane
Water-Repellent Sealer
| Specially formulated for flat and vertical, dense and porous concrete surfaces including soft masonry. |
 |
 |
 |
 |
 |
Coverage
| Estimated Application Rate ( sq. ft. per gallon) |
Sq. Ft. / Gallon |
Vertical |
Horizontal |
1st Coat |
40 – 60 |
100-150 |
2nd Coat |
60 – 100 |
100-150 * |
| One saturation coat is normally sufficient for vertical smooth concrete or masonry. For textured or horizontal surfaces a second coat may be required. A second coat can only be applied while the first coat is still damp. The surface texture and style of mortar joints can greatly affect application rates. Always apply material to test area prior to general application to establish spread rate. |
Application
OKON S-40 is best applied by low-pressure airless spray but can be applied by garden-type sprayer. Small areas can be applied by brush or roller. For airless spray, reduce pressure to 500 psi and use a large tip - . 035 - 050” tip. |
 |
   |
| Performance Features |
• Protects from the damaging and
unsightly effects of water absorption
- Efflorescence
- Freeze-thaw damage
- Water damage
• Breathable
• 100% reduction in water leakage
per ASTME514 |
| Easy to use |
| • Pre-mixed, no dilution needed |
| Environmentally Friendly |
• Water base
• Very low odor
• Low VOC - Complies with South
Coast Air Quality Management
District. Rubs (SCAQMD) |
Decorative |
• Lets the natural beauty and texture
of decorative concrete show through
• Stays clear, does not yellow
• No sheen or film build-up |
| Warranty |
| • Backed by a 10 year warranty for qualifying projects* |
|
|
|
|
|
|
|
