Protection for Concrete & Masonry
|
|
|
|
Seal & Finish
Clear Water-Base Concrete and Masonry Sealer
| Excellent protection for interior and exterior concrete floors – patios, pool decks, stained or stamped concrete, basement floors |
 |
Coverage
| Estimated Application Rate ( sq. ft. per gallon) |
Surface |
1st Coat
|
Add’l Coats |
Rough (broom finish) |
150 |
250 |
Smooth (float finish) |
200 |
300 |
Very-smooth (trowel finish) |
300 |
400 |
| The spread-rate of SEAL & FINISH will vary with the porosity and texture of the surface. Multiple coats of SEAL & FINISH can be applied to increase the durability and the final gloss. |
Application
SEAL & FINISH is ready-to-use, no thinning is required. It appears milky-white when applied but dries clear. It can be applied by brush, 1/8” nap roller, pad or sprayer. Stir, do not shake. Apply an even, thin, wet coat maintaining a wet-edge to avoid lap marks. Work from a container and do not pour product onto surface to spread. Stop application at expansion joints, walls or breaks defined with masking tape. Do not allow product to puddle. |
 |
  |
| Performance Features |
• Makes concrete floors easier
to clean
• Provides stain resistance
• Works as a protective layer over decorative concrete stains
• As a topcoat, protects the beauty
of concrete
•Breathable
|
Looks Great |
• Stays clear, does not yellow
• Low gloss finish |
| Easy to Use |
• Pre-mixed, no dilution necessary
• Does not require acid etching
• Can be touched up or recoated |
|
|
|
|
|
|
|
