Protection for Concrete & Masonry
|
|
|
|
W-2
Water-Repellent Sealer with MicroPlug™ Technology
| Specially formulated for porous concrete vertical surfaces. |
 |
 |
 |
 |
 |
Coverage
Estimated Application Rate ( sq. ft. per gallon) |
Medium Weight
Block |
Smooth |
Split Face |
Slump |
65 |
50 |
95 |
Normal Weight Block |
Smooth |
Split Face |
Slump |
80 |
75 |
120 |
Other |
Rough Stucco |
Concrete Brick |
Broomed Slabs /
Blasted Concrete |
75 |
65 |
95 |
If a second coat is required, estimate that it will cover 50% more surface area than the first coat. |
| The spread-rate of OKON W-2 will vary with the porosity and texture of the surface. A test area must be applied to establish actual spread rate for each surface. After application, water should bead and sheet off surface. If not, apply an additional coat. OKON W-2 can be recoated after the initial coat is dry, clear and colorless. A minimum of two coats are generally required to receive a 5 year warranty. |
|
Application
W-2 can be applied by garden-type sprayer but is best applied by low-pressure airless spray. Use a small to medium size airless pump (.33 - .66 gpm) at 500 psi and a .031” tip.
|
 |
   |
| Performance Features |
• Protects from the damaging and
unsightly effects of water absorption
- Efflorescence
- Freeze-thaw damage
- Water damage
• Breathable |
| Easy to Use |
| • Pre-mixed, no dilution needed |
| Water based |
• Environmentally friendly
• Very low odor
• Low VOC - Complies with South
Coast Air Quality Management
District. Rules (SCAQMD) |
Decorative |
• Lets the natural beauty and texture
of decorative concrete show through
• Stays clear, does not yellow |
Warranty |
| • Backed by a 5 year warranty for qualifying projects* |
|
|
|
|
